• Shop
  • Rental
  • Media
  • Service
  • Events
  • Imprint
  • Privacy Policy
  • Terms & Conditions

Product Categories

InfiRay PFN 640+ Multi-functional Thermal monocular
InfiRay PFN 640+ Multi-functional Thermal monocular
InfiRay PFN 640+ Multi-functional Thermal monocular
InfiRay PFN 640+ Multi-functional Thermal monocular

InfiRay PFN 640+ Multi-functional Thermal monocular

€4,248.30

Price inlcuding VAT based on your IP location.

PFN 640+ : Multifunctional thermal imager

The PFN640+ is the smallest thermal imaging multipurpose monocular based on the new 12µm sensor. The combination of 50Hz refresh rate and the latest 12µm sensor with a resolution of 640×512 pixels provides a razor sharp image. Resistance to adverse weather conditions such as fog, rain, snowfall or large temperature fluctuations from -45°C to +55°C does not affect the performance of the device.

The PLF has two viewing modes: handheld or clip-on.

Clip-on mode and helmet-mounted mode are identical. The image is reduced in size to show a 1x display. When the RH25 is set to Handheld mode, the image is magnified to 1.3x. In the 1.3x image display, the image section is round. The screen also has an inclinometer and a digital compass.

The PLF has three simple buttons. Power, Menu and Image. These keys have different functions depending on how long you hold them down. If you press the Power key, the device is switched on. If you press and hold the button while the unit is on, it will enter a menu to turn the unit off. If you press the power button briefly, the sensor will be recalibrated. With the middle menu key, you can call up the options menu by pressing briefly. Press and hold to switch from handheld to clip-on mode. Short press the picture button to take a photo. Long press captures a video.

There is a 7-pin Fischer connector on the side. The PLF comes with a split USB/BNC video output cable. The USB port is used to download images and video. The BNC video output is used to output the thermal image via a mini DVR.

Standard 18650 rechargeable batteries are used for operation.

Due to the 2x and 4x digital magnification, even objects at great distances can be observed and identified perfectly.

Thanks to the 25mm objective lens, the PLF can be used for both close-up and long-distance observation.

The overall height with Picatinny rail is 46.5mm.

The PFN640+ is delivered without integrated reticle. On request, the reticle can be programmed.

According to German law: With programmed reticle, no Picatinny / weapon mount may be screwed on. With a valid hunting license and without a programmed reticle, the Picatinny / weapon mount may be mounted on the device and the PFN640+ may be used as an attachment on the weapon.

Abroad, this regulation may differ and must be observed.

Included accessories:

    Picatinny mount, spring loaded
    Padded carrying case
    2x eyecups (1x for hand-held / 1x for clip-on)
    Helmet mount (for VAS Shroud)
    Charging and data transfer cable
    USB power adapter (USA)
    Battery charger
    Battery cover for 18650 & 18700
    Connector for combination with dual-bridge and Mini 14/MUM
    Microfiber cloth
    Tool kit
    Screws (blunt tip for helmet mount / triangular tip for gun mount)

 

 Available for the following countries: All EU states, Great Britain, Norway, Switzerland, USA, Canada, Australia, Japan, New Zealand

Specs

Resolution 640x512/12µm
Objective Lens 25mm
Recognition Distance (People) 600m
Recognition Distance (Vehicle) 1070m
NETD ≤40mK
Frame Rate 50Hz
FOV 17.2°×13.7°
Operating Time ≥5h
Battery 18650×1
Display 1024×768, 0.39 inch
Exit Pupil Distance 15mm~35mm
Diopter -4 to +4
Interface Picatinny, Helmet tipping frame
Weight ≤355g
Dimensions 105mm×65mm×48mm
Ingress Protection Rating 105mm×65mm×48mm
Operating Temperature -40°C~+55°C
Storage Temperature -55°C~+70°C
NightTec Logo
© 2024 NightTec | All Rights Reserved